Gifts Galore!

Most of today was spent enjoy football, food, and the company of our friends. However, this evening I took some time to do a few quick quilting projects. 

As I mentioned yesterday evening, I wanted to make the Tissue Holder that was featured on the Riley Blake Designs website. To do this all you need is 3 pieces of 4 by 6 inch fabric. To make the tissue holder you form it inside out, then sew around the outside and invert to have your Right Sides showing. This was really quick and looks way cuter than carry around a plastic stash of klennex. I plan to make a few more of these, likely one with the peacock fabric, and the others from different fabrics I have a good amount of. 

Completed holder, showing tissue inside :)

Completed Holder Closed

Once completing this little project (less than 15 minutes!) I decided to see if I could reverse engineer my coffee coaster from yesterday to use less material. The Riley Blake Design pattern for the coffee coaster/hot pads calls for 5 squares of equal size, one square is your backing, and then the other 4 are ironed in half, and when you sew it together and invert it only 1/2 of each fabric still shows... this lead me to wonder if you really needed the underside of fabric. So I took the corners that I had cut off my Christmas Tree Skirt and used the seam ripper to borrow the 1/2 triangle squares then I cut down the 5 inch corner square to the size of the 2 half triangles (because they were cut just over 1/4 inch they weren't a full 5 inches together). Once I had this done I laid the fabrics the same way requested by the original pattern, but I did Wrong Sides up so when I inverted the Right Sides would come through. The results were just ok. In the original design the middle points of the fabrics meet but aren't sewn together which looks fine, but with this there was a good amount of gap, so I took my hand at sewing a few extra lines in to hold down the middle better.  The coaster turned out to be usable, but I wouldn't do this for future coasters, the original way was better. 

What I consider the Top

Bottom of Coaster

Once this was complete I decided to go back to the original pattern;  I had 15 charm squares left from my Mr. Claus set I'd ordered for the Christmas Tree Skirt, so I ended up using them to create 3 more coasters to go with the one I completed last night. 

Complete Set, Fronts of Each. To get the centers to meet I ended up pinning them and then sewing the outer border. 

Two Fronts, Two Backs. The Merry Christmas Fabric is on the back of all 4, 2 are Red, 2 are Green. It was the only fabric that required it go a specific direction so I figured I'd match it. 

So far that's what I've done for the evening, I might try a few more things but we'll see. I'll be sure to update if I do!

10 Minute project!

Quilted coaster! So easy to make, take 5 charms, iron 4 in half, stack on top of batting, sew around all corners, clip corners, turn inside out, and sew new border and tada you're done!!

Learned it from Riley Blake Designs Website Tutorials, you can find it here.

Front Side

Back Side

Quick and Easy

Last night I started attempted to take my original log cabin block (see below) and turn it into a hot pad. I cut the backing and batting, pinned the layers together, quilted the areas desired, and then cut and ironed the binding. Pretty good for a quick turn around if you ask me! 

 Below are pictures of the project in action!

Original Log Cabin Block

During Quilting/Binding Process. Added the batting/backing, and pins, this point I had completed the machine quilting. I did the stitch in the ditch which turned out pretty well! 

Quilted Edges using Stitch 23

Quilted Edges Closeup, White thread for the Navy, and Multi-Color for the Red/Green

 All that I had to do today when I arrive home was finish pinning the binding and then sew it on. Even though I knew machine binding is not the cleanest way to go I decided to attempt it again. This time I knew going in that I would want to cut my excess binding and backing down to just a 1/4 inch to ensure I'd have enough room to fold the binding from front to back properly. I rewatched the Missouri Quilts video on how to bind a quilt and stole their trick for making the edges look nice. Funny thing is I had no problem pinning and sewing it on two corners but the other two corners made me totally confused and I eventually got them pinned but when I sew them I accidentally sewed them shut and had to use my seam ripper to release them in the end. Thankfully you can't see those mistakes in the finished product but crazy how you can easily do something and then the next time you try it you can totally mess it up. 

Ta Da: The Finished Hot Pad

If you're wondering why none of my photos of table toppers or hot pads are on my table, its because the table has been taken over by fabric, sewing machine, cutting mat, and so much more! 

Completed Front Side and Completed Back Side of Hot Pad

Closeup of Binding, Quilting, and Top/Back

Matching Hot Pad and Table Runner! 

After finishing these projects I decided to just make a fun block that could potentially be used later or if not I figured maybe it could be a hot pad. Using the Peacock Fabric and the 3 types of pink/mauve that I had I took the Bridle block from week one and made it my own. Here is the result:

Instead of having 4 sets of the outer most corners in the middle nested together I decided to just emphasize the pretty peacock fabric and put it in the middle as an accent.